Accurate and fast. Suitable for use in all ceramic materials.
A clay 3D printer is open and accessible from three sides.
Compact professional 3D printer, prints up to 100 cm high.
 
Technical data
Print volume: diameter Ø400 mm; height 1000 mm; minimum layer: 0.5 mm; maximum print speed: 150 mm per second; Maximum speed: 150 mm/s; acceleration: 500 mm/s
Materials
Plastic clay, porcelain, other.
Extras
Extruder with a nozzle of 1.5, 2 or 3 mm (included in the basic package)
Extruder XL  with a nozzle of 4, 6 or 8 mm (no included in the basic package)
Cone nozzle adapter 1.2 and 1.5 mm (no includedin the basic package)
interface
SD card + LCD screen
software
Windows, Mac, Linux
Simplify3D® cutting
Cura, Slic3r compatible for cutting
File type: .stl, .obj, .gcode
physical dimensions
Base dimensions: 77 cm x 85 cm, height 195 cm; printer weight: 80 kg.
Dimensions and weight for the cardboard packaging on a surface: 100 cm x 100 cm x 230 cm, weight 130 kg.
electrical power
220/240 V 50/60 Hz.
Power: 180W.
Note: An air compressor is required (minimum pressure 8 bar).
temperature
Use: 20-30 degrees Celsius; Storage: 0-30 degrees Celsius.
mechanics
Frames and surfaces: sheet metal (reduces the vibrations of the machine, gives the best print quality), aluminum, painted steel Printing substrate: wood multilayer substrate. Movements: On anodized aluminum, open sides give the possibility to stop the printer and interact with the part during printing.
The contents of the package
Delta Wasp 2040 3D printer
Extruder LDM WASP 3.0 with a nozzle with a diameter of 1.5, 2, 3 mm
One 5 liter container
Multi-layer printing substrate
12.5 kilos of red clay
Air compressor
The 8 bar 50 L air compressor and the hose connecting it to the 3D printer are not providedby WASP.
Useful tip:  The nylon hose is usually supplied by the air compressor supplier.
You can also purchase the pipe from any hardware store in a variable length.  Ask for an 8 mm or 5/16 inch nylon pipe (external dimension).
Backup systems
System  which allows users to save their print job and resume it in the event of a power outage.
The system that measures the height  of the print to start from this height point.
Technology news
Non-stop printing: you can move the printer and not remove the object - every time the printing process is finished (this will avoid waiting for the object to dry).
Printing from a surface or the ground or from 2 printing substrates at different heights.
Extruder with controlled material dosage thanks to the screw (2013).
Controlled air pressure on the printer.
Perfect stability thanks to a new sliding system on bearings.
Air hose connection integrated in a dedicated firmware printer.
responsibility
Wasp's online support service at:
https://www.3dwasp.com/en/support/
Telephone assistance in English is active from Monday to Friday.
Phone  3518779122 39+ between the hours 8:30 - 13:00 and 14:00 - 17:30 Italian time.
Before contacting the telephone assistance number, be sure to fill out the support form on the website at:
https://www.3dwasp.com/en/support/#formassistenza